- Moisture measuring range : programming from 0-50 ppb
to 5000 ppm（v） equivalent value in dew point at
referenced pressure
- possibility of decimal switching over two ranges : for instance
0-10 / 0-100 ppm（v） H20
- resolution : 0.01% of measuring range and for the minimum
1 ppb
- sensitivity : 0.01% of measuring range and for the minimum
1 ppb
- repeatability : 0.01% of measuring range and for the minimum
1 ppb
- double threshold moisture alarm programmable
- read-out : up to 5 digits by LED
Moisture Monitor analogic output :
• 4-20 mA or 0-20 mA or 0- 10V （programmable）
• isolated
• accuracy 0.1% of range
• resolution : 12 bits
• impedance maxi. : 500 ohms for output in current
• impedance mini. : 10 ohms for output in volts
Moisture Monitor digital output :
• serial RS232C or RS485 （option） : bi-directionnal loop 200
mA 300 to 2400 bauds
or
• field bus << Device Net >> （option）
• power supply : 85 to 250 VAC - 50/60Hz or 24 VAC or 10 to
30 VDC
• consumption : 100 VA
• battery for portable unit : 4 running hours autonomy
• sensor/control unit interconnection : current loop 2 wires,
maximum line impedance : 10 ohms for loop
• sample pressure : 1.5 to 200 bar g.
• sample temperature : -10 to 80°C
• sample analyser flow rate : 100 Scc/mn
• sample by-pass flow rate : Q （sl/h） = inlet pressure （bar g） x 11
e.g. : for 10 bars g inlet pressure ; Q = 110 sl/h.